Curved driveway in a garden at night, a line of illuminated stones traces the curve

Landscaping

  • Beckstone LED Paver Light

Ground-level light leads through green spaces without overpowering the landscape.

The planning problem

Since footpaths often run through green areas, which are naturally darker than pure traffic areas due to the lack of reflective surfaces, numerous dangers lurk here for pedestrians and especially people with impaired vision. Even with generous provision of classic pole lights, the resulting islands of light impair the visibility of the sidewalk surface and surefootedness in dark areas.

Beckstone LED Paver Lights lining the edge of a swimming pool at night

Beckstone

As a continuous strip of light, Paver Lights provide valuable guidance and guide pedestrians through all light and dark areas without any glare.

The marking directly on the ground prevents shadows from being cast by regrowing bushes and trees. Even in snowfall, illuminated paths and terrain edges remain clearly visible and prevent accidents.

When renovating existing paths, edge borders with stretcher courses and a few luminous stones offer elegant and cost-effective options for retrofitting with Paver Lights.

In their function as recreational areas for your citizens, public green spaces are particularly dependent on careful design. The “NATURE” and “STYLE” surface systems of Paver Lights are therefore perfectly adapted to the surrounding natural stone or concrete paving.

Thanks to this “invisibility” during the day, Paver Lights leave natural green spaces visually unaffected.

Curved driveway between a natural-stone edge and a lawn at night, Beckstone LED Paver Lights lining the edge

Suitable lights

  • Recommendation

    Paver Lights

    For paved paths, edges and pool surrounds in green spaces: ground-level light in the surface.

    View Paver LightsData sheet
  • Also possible

    Road Studs

    Asphalt paths in a park can be guided with Road Studs.

    View Road Studs
Surfaces
STYLE smooth, NATURE natural stone
Light colors
Warm white 2700 K, daylight white 6500 K
Operating voltage
9 to 15 V DC
Protection category
IP68

Installation in three steps.

  1. Set the light into the bedding

    The light is laid next to the last paving stone as the paving progresses, with the cable in the sand bed.

  2. Connect electrically

    All lights are connected in parallel to the low-voltage main line, which an LED driver supplies.

  3. Grout and compact

    The light is grouted with the surrounding paving. Compacting uses a rubber apron after thorough sweeping.

Installation manuals

Start your landscape project

Combine elegant design with safety for your green spaces.