Road Studs

LED Road Studs

Road Studs mark lanes, bike paths and roundabouts with their own light, where paint is no longer enough at night, in rain and in fog. Solar variants need no cable trench and no grid connection.

Key figures

Load capacity
20 t to 160 tdepending on the variant
Power supply
Solar or hardwired
Protection category
IP68, IK10

Solar

Hardwired

Dimensions, light colors, product numbers and all further values are in the data sheet of the respective variant. Data sheets

Engineering

Curves and roundabouts Our LED Road Studs mark curves, bends and roundabouts and give clear guidance there.

Features in use

Sunlight powered
After the first charge, CONTROL and PERFORMANCE need at least 1 h of direct sunlight per day, BASIC and FORCE with a capacitor 4 h.
Snowplow resistance
ONE-WAY, TWO-WAY, STARWAY, CROSSWALK and Solar FORCE in stainless steel are snowplow-proof.
Solving road damage
Each Road Stud sits in its own drilled hole and is set with the adhesive TRIFLEX CRYL R 238 that the installation manual specifies.
Clean installation
Before setting the stud, the hole is cleaned and dried with a torch, because residual moisture weakens the adhesive bond.
Enhanced visibility
ONE-WAY, TWO-WAY and TWO-WAY S state a visibility distance of up to 1 km, STARWAY high visibility in bad weather.
Durability
Depending on the variant, 20 t (TWO-WAY S) to 160 t (CROSSWALK); HALO is not designed to be driven over.
Environmental sustainability
The solar variants charge from sunlight and need no supply cable.
Safety in varied conditions
All variants operate from −25 °C to +85 °C (−13 °F to +185 °F), with protection category IP68 and impact resistance IK10.

What all variants share

Protection category IP68, IK10 and, for STARWAY, a load capacity of 135 t (stainless steel, externally verified). Solar Road Studs need no supply cable. Cable trench and mains connection are not needed.

Protection category
IP68, IK10
Operating temperature
−25 °C to +85 °C (−13 °F to +185 °F)

Light colors

  • Daylight white
  • Warm white
  • Red
  • Amber
  • Green
  • Blue

On TWO-WAY, TWO-WAY S, CROSSWALK and the solar variants each side can take its own light color, on CONTROL and PERFORMANCE even each of the two LEDs per side.

For lighting designers

  • Find our products in the DIALux Luminaire Finder

    For detailed information tailored to lighting designers, explore our full product range directly in the DIALux Luminaire Finder.

    Open in DIALux (opens in a new tab)

We help you plan and choose

Solar or hardwired, which variant, which light color? We help you choose and support the planning of your project.

Bring us into the planning early.

Schedule a consultation with our team to discuss project specifications.